中华钢结构论坛 China Structure Forum

标题: Statics Check Results [打印本页]

作者: sue_weng 时间: 2013-5-22 00:53 标题: Statics Check Results

L/C      Fx kN Fy kN Fz kN Mx kNm My kNm Mz kNm
1 Loads    0.000 -99.471    0.000    298.087    0.000 -715.680
Reactions    0.000    99.471    0.000 -298.087    0.000    715.680
Difference    0.000 -0.000    0.000 -0.000    0.000 -0.000
2 Loads    0.000 -127.200    0.000    374.475    0.000 -908.025
Reactions    0.000    127.200    0.000 -374.475    0.000    908.025
Difference    0.000 -0.000    0.000 -0.000    0.000 -0.000
3 Loads    0.000    0.000    0.000    0.000    0.000    0.000
Reactions    0.000    0.000    0.000    0.000    0.000    0.000
Difference    0.000    0.000    0.000    0.000    0.000    0.000
4 Loads    0.000 -298.390    0.000    878.456    0.000 -2130.076
Reactions    0.000    298.390    0.000 -878.456    0.000    2130.076
Difference    0.000 -0.000    0.000 -0.000    0.000 -0.000

What does this Results stand for?

Why I have 2130.76 KNm Results there.
There is no any error alarm in my model.

Thanks a lot!

作者: Jingtao 时间: 2013-9-25 06:11

1) These results meant that the resultant of applied load is balanced by the reaction.
2) 2130.76 KNm is the the resultant Mz value of reaction in load case 4.

欢迎光临中华钢结构论坛 China Structure Forum (http://okok.org/)